Mn(II) and VO(IV) Schiff base complexes encapsulated in nanocavities of zeolite-Y: catalytic activity toward oxidation of alkenes and reduction of aldehydes

Oxovanadium(IV) and manganese(II) complexes of two Schiff base ligands, bis(2,4-dihydroxyacetophenone)-1,2-propandiimine (H₂L₁) and bis(2,4-dihydroxyacetophenone)-ethylenediimine (H₂L₂) were synthesized and characterized. The encapsulation of these complexes in the nanocavities of zeolite-Y was achieved by a flexible ligand method. The prepared heterogeneous catalysts have been characterized by FTIR, NMR and atomic absorption spectroscopy, X-ray diffraction patterns, scanning electron microscopy and BET. The catalytic activities of the encapsulated complexes were studied in the oxidation of alkenes with H₂O₂ and the reduction of aldehydes with NaBH₄. In most cases, the manganese (II) complexes (MnL₁-Y, MnL₂-Y) showed better activity than the oxovanadium (IV) complexes (VOL₁-Y, VOL₂-Y) in both oxidation of alkenes and reduction of aldehydes. The catalytic activity of the recovered catalysts was compared with the fresh ones.     

Inside-Needle Extraction Method Based on Molecularly Imprinted Polymer for Solid-Phase Dynamic Extraction and Preconcentration of Triazine Herbicides Followed by GC–FID Determination

An inside-needle extraction method was developed through thermal polymerization of atrazine-molecularly imprinted polymer (MIP) on the internal surface of a stainless steel hollow needle, which was oxidized and silylated. The fabricated coating (MIP layer) for the needle was durable and showed very good chemical and thermal stability. It could be mounted on a glass syringe and be directly coupled with gas chromatographic (GC) systems. The parameters being effective on the coating and extraction processes, namely nature of oxidizing agent, silylation time, nature and amount of porogen, template-to-MIP components ratio, polymerization time and temperature, sample volume, flow rate, pH and ionic strength of the sample were investigated and optimized. The extraction needle showed high selectivity as well as a great extraction capacity for triazines. The extraction of atrazine, simazine, cyanazine, ametryn, prometryn and terbutryn using the fabricated extraction needle and followed by GC analysis resulted in detection limits of 2.6, 21, 24, 32, 38 and 42 ng mL⁻¹, respectively. The fabricated needle proved to be applicable to the analysis of real samples by comparing the results obtained for non-spiked and spiked samples of grape juice, tap water and groundwater.

     

Transient spike adding in the presence of equilibria

Many models of neuronal activity exhibit complex oscillations in response to an input from other neurons in a network or to an input from a stimulus. We consider the effect of a single short stimulus on a simple model designed to mimic some features of neuronal dynamics. We focus on the transient response induced by the stimulus, particularly on the spike-adding behaviour of the response. Our main goal is to explain how the transient response is affected by the presence of unstable equilibria. We also investigate the dependence of the number of spikes on the amplitude and duration of the stimulus. In our analysis, we use numerical continuation methods and exploit the presence of different time scales in the model.     

An investigation of Forex market efficiency based on detrended fluctuation analysis: A case study for Iran

The efficient market hypothesis (EMH) states that asset prices fully reflect all available information. As a result, speculators cannot predict the future behavior of asset prices and earn excess profits at least after adjusting for risk. Although initial tests of the EMH were performed on stock market data, the EMH was soon applied to other markets including foreign exchange (FX). This study uses the detrended fluctuation analysis (DFA) technique to test 01:12:2005–18:04:2010 Iranian Rial/US Dollar exchange rate time series data to see if it can be explained by the weak form of the EMH. Moreover, to determine changes in the degree of inefficiency over time, the whole period has been divided into four subperiods. The study shows that the Iranian Forex market (the Rial/Dollar case) is weak-form inefficient over the whole period and in each of the subperiods. However, the degree of inefficiency is not constant over time. The findings suggest that profitable risk-adjusted trades could be made using past data.     

An Ab Initio Study and NBO Analysis of the Stability and Conformational Properties of Hexakis(trimethylelementhyl)benzene (Element = C,Si, Ge,and Sn)

Ab initio molecular orbital and density functional theory were used to investigate energetic and structural properties of the various conformations of hexa-tertbutylbenzene (1), hexakis(trimethylsilyl)benzene (2), hexakis (trimethylgermyl)benzene (3), and hexakis(trimethylstannyl)benzene (4). HF/3-21G//HF/3-21G and B3LYP/3-21G//HF/3-21G results revealed that the Twist-Boat (TB) conformer of compound 1 is more stable than the 1-Chair (C), 1-Boat (B), and 1-Planar (P) conformers. B3LYP/3-21G//HF/3-21G results show that the 1- TB conformer is more stable than 1- C, 1- B, and 1- P conformers of about 1.13, 4.34, and 99.94 kcal mol^?1 , respectively. Contrary to the stability order of compound 1 conformers, the C conformer of compounds 2–4 is more stable than TB, B, and P conformations, as calculated by B3LYP/3-21G//HF/3-21G and HF/3-21G//HF/3-21G levels of theory. The energy gap between the C and P conformers in compounds 1–4 is decreased in the following order: ΔE(4: C, P) < ΔE (3: C, P) < ΔE(2: C, P) < ΔE (1: C, P). This fact can be explained in terms of the increase of C _aromatic -M (M═C, Si, Ge, and Sn) bond lengths and the decrease of steric (van der Waals) repulsions in the previously discussed compounds. For compounds 1–3, the calculations were also performed at the B3LYP/ 6-31G*//HF/3-21G level of theory. However, the comparison showed that the results at B3LYP/3-21G//HF/3-21G methods correlated well with those obtained at the B3LYP/6-31G*// HF/6-31G method. Further, NBO analysis revealed that in compounds 1–4, the resonance energy associated with the σ_M-C1 to σ*_C2-C3 delocalization is 5.20, 9.68, 11.15, and 12.27 kcal mol^?1, respectively. These resonance energy values could explain the easiness of the ring flipping processes of C, B, and TB conformers of compounds 4 to 1. Also, the NBO results showed that by an increase of the σ_M-C1 → σ *_C2-C3 resonance energies in compounds 1–4, the σ_M-C1 bonding orbital occupancies decrease. This fact could fairly explain the increase of the C_aryl-M bond length from compound 1 to 4. The NBO results are also in good agreement with the calculated energy barriers for the ring flipping of the chair conformations in compounds 1–4, as calculated by B3LYP and HF methods.     

Solvent-Free Acetylation of Thiols Under Catalysis of MgBr2·OEt2

Solvent-free protection of aromatic and aliphatic thiols with acetic anhydride was performed at room temperature under trace quantities of magnesium bromide ethyl etherate, affording rapid formation of various thiol esters in excellent yields.     

Ab Initio Study of Structures,Metallotropic 1,2-Shifts and Prototropic 1,2-Shifts of Cyclopentadienyl(trimethyl)silane, -germane and -stannane

Molecular structures, metallotropic and prototropic shifts of cyclopentadienyl(trimethyl)silane ( 1 ), cyclopentadienyl(trimethyl)germane ( 2 ), and cyclopentadienyl(trimethyl)stannane ( 3 ) were investigated using ab initio molecular orbital and the Becke, Lee, Yang, and Parr density functional (B3LYP) methods. The results show that the most stable structure of compounds 1-3 has the (CH 3 ) 3 M fragment in the allylic position. The energy barrier of metallotropic shifts in compound 1 is higher than in 2 , and in compound 2 higher than in 3 , in good agreement with experimental data. The cyclopentadienyl rings in compounds 1-3 are found to be planar but this result contradicts the reported experimental data.     

Preparation and characterization of novel polyimide‐silica hybrids

Polyimide‐silica (PI‐SiO₂) hybrids were prepared from a novel polyimide (PI), derived from pyromellitic dianhydride (PMDA), 1,6‐bis(4‐aminophenoxy)hexane (synthesized) and 4,4′‐oxydianiline. SiO₂ networks (5–30 wt%) were generated through sol–gel process using either tetraethylorthosilicate (TEOS) or a mixture of 3‐aminopropyltriethoxysilane‐PMDA‐based coupling oligomers (APA) and TEOS. Thin, free standing hybrid films were obtained from the respective mixtures by casting and curing processes. The hybrid films were characterized using Fourier transform infrared, ²⁹Si nuclear magnetic resonance (NMR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectrometry and atomic force microscopy (AFM) techniques. ²⁹Si NMR results provide information about formation of organically modified silicate structures that were further substantiated by FE‐SEM and AFM micrographs. Contact angle measurements and thermogravimetric thermograms reveal that the addition of APA profoundly influences surface energy, interfacial tension, thermal stability and the residual char yield of modified hybrids in comparison to those obtained by mixing only TEOS. It was found that reduced particle size, efficient dispersion and improved interphase interactions were responsible for the eventual property enhancement. Copyright © 2012 John Wiley & Sons, Ltd.